Why Does My Car Make A Noise When I Turn?

This site contains affiliate links to products. We may receive a commission for purchases made through these links.

When it comes to unfamiliar sounds coming from your vehicle, you should take them very seriously for your own safety. This is especially the case when you turn your vehicle either at a slow or faster speed to the left or the right.

In this article, we will listen closely to the different sounds your vehicle may make and what they mean. We will also provide you with a solution when you hear any unsettling sounds.

Read on and find out what disturbing sounds come from your vehicle when you turn so you can fix the problem.

The Sounds You May Hear

These are the sounds that may come from your vehicle when you turn and what to do when you hear them. First, we will start with the most common reasons why your car may make noises when you turn your vehicle.

Clicking Sound When Turning Fast

This clicking and crunching sound you hear when turning fast to the left or to the right can be faulty CV joints. Another problem can be bad coupling if the car makes noises when you go around a corner at a fast speed.


The only solution to this problem is to replace the CV joints as soon as possible and replace the coupler rubbers. Failing to do so will result in uneven wear of the tires and uncomfortable handling of the vehicle.

Whining Sounds When Turning at Normal Speed

When you hear screeching and whining sounds when you turn at normal speeds, it can be because the power steering fluid level is low. The power steering belt can also be loose, or there might be a crack in the hydraulic hose.


You must top up the hydraulic fluid level, fasten the steering motor’s belt, and look for wear on the belt. If that doesn’t stop the sound, you should take it to a mechanic to take a look at the power steering system.

Noises When Turning at Slow Speeds

When this occurs, there might be a problem with the power steering system, as mentioned above. It could also be worn out or even broken suspension joints that cause a creaking sound coming from the front of the car.


If you find it is the power steering that makes the noises, the steps mentioned should be taken to fix the problem. Suspension joints should be replaced by a professional if that seems to be the cause of creaking noises.

Knocking sounds that come from the front of your car can be an issue, especially if you simultaneously experience that you can’t handle the car properly. The cause of this can be a bad sway bar link, or it can even be broken and prevent proper handling.


The only way you can solve this is by replacing the bar if it is broken, which should be done by a professional.

Tie Rod Ends Are Damaged

A clunking sound when you turn your car can be because of a busted or bad tie rod end. It can also cause vibrations in your car and uneven tire wear can also be a sign the car may also not turn easily.


Regreasing the tie rod ends on the inner and outer and replacing the boot can help solve the problem. If it is too badly damaged, it is better to let a professional look at it or replace it.

The car wheel shaft mechanic has checked and repaired.

The Ball Joints Are Bad

If the ball joints are not in good condition, they may cause loud creaking sounds when turning the car. These ball joints help to support the movement of the steering control arms and knuckles for even driving.


Take a look at them to see whether they are damaged; if not, simply apply lubricant and test if the sound subsides. These joints need to be regularly lubricated so they can perform their job the best in sustaining the knuckles and arms.

Struts and Shocks Are Bad

Even though these parts may last for a very long time, they may become worn out and not perform as well as they should. Loud noises when turning together with a loose and bouncy feeling can be the first sign these are getting bad.


When this happens, you need to replace the struts and shocks on your vehicle so you can drive safely. This can be done at home, but it is better to make use of professional technicians who have the proper tools to get it done.

The Bushing is Worn Out

The jounce bushing at the front end of the strut can get worn out and cause the creaking and groaning sound when turning. The bushing can also start cracking when it becomes too dry and cause the same results; it can also prevent proper handling.


The treatment and gear4wheels1-20nt of these bushings can only be done by someone with some experience. To be on the safe side, you should get help from a professional repair shop to fix this problem.

A Worn Steering Column Bearing

This problem may cause your steering to make a strange rubbing sound when turning your vehicle to either side. This is because the upper bearing found on the steering column can get worn out and cause these noises.


If you apply a lubricant, it may help to solve this problem and cause the sounds to go away. If this doesn’t help, you need to let a professional look at it to see if it needs to be replaced.

The Power Steering Rack is Damaged

This might not occur on a new model car, but it can happen that the power steering rack gets damaged at some point. This may cause some creaking and whining sounds when you turn the car at a low speed.


It is recommended that you visit a professional technician to fix this problem as quickly as possible.


While some of these problems on your vehicle can be handled and fixed at home, it is recommended to see a professional. A professional mechanic has the proper training and experience and the best tools to fix these issues on your car.

Hopefully, this will help to sort out the problems you experience and drive safe!